Forum Replies Created
-
AuthorPosts
-
-
June 16, 2019 at 17:06 #12550Ray SeligmanParticipant
Sorry for all the upload errors. Photos were simply too big. All you fathers out there have a good Father’s Day.
Attachments:
You must be logged in to view attached files. -
June 16, 2019 at 16:51 #12549Ray SeligmanParticipant
One or two more
-
June 16, 2019 at 16:48 #12547Ray SeligmanParticipant
Additional photos
Attachments:
You must be logged in to view attached files. -
May 26, 2019 at 17:01 #12495Ray SeligmanParticipant
Got one for my plane. A tiger AA-5Bwith wheel pants. It works absolutely beautifully and I would recommend it to anyone.
-
April 30, 2019 at 10:35 #12428Ray SeligmanParticipant
Should read “pushing it is a bear” not “using it is a bear”
-
October 29, 2018 at 11:30 #10564Ray SeligmanParticipant
Thanks for the information. As usual you seem to have the ability to bring a problem to it’s very basics. Really good to see you back on line and I hope that your recuperation is going well.
-
August 29, 2018 at 12:34 #9056Ray SeligmanParticipant
Good suggestion. I will be providing the avionics. Do you know of any shops in New Hampshire that do quality work at a reasonable price good suggestion. I will be providing the avionics. Do you know of any shops in New Hampshire that do quality work at a reasonable price for installing the equipment?
-
June 29, 2018 at 11:11 #8946Ray SeligmanParticipant
Still me. Anyone know of anyone?
Thanks
Ray Seligman -
March 25, 2018 at 07:12 #8670Ray SeligmanParticipant
Thank you so much. That is perfect. If I go to my local mechanic will he know what type of screw and washer that is? Does it have to be replaced with an identical one?. Again, thanks so much.
-
March 24, 2018 at 19:29 #8664Ray SeligmanParticipant
So is it legal for me to glue this piece back together and put the proper screw and washer on it? It seems to be held on only with one screw on top, one on the bottom and it is pressed into position. Seems to be a faring and not anything structural. If so do you have any recommendations as to what adhesive I should use and does the particular screw and washer have a particular number designation?
Attachments:
You must be logged in to view attached files. -
January 23, 2018 at 13:40 #8284Ray SeligmanParticipant
Do most of you tiger guys/gals change your own ELT batteries or do you have the mechanic do it?
-
January 6, 2018 at 19:11 #8171Ray SeligmanParticipant
Thank you for the information. I was looking to get a camera to video inside the cockpit. Do you know if it will also record ATC communication and where does it get the input for the heading and the airspeed in the altitude? Thanks so much and happy new year
-
January 2, 2018 at 13:06 #8148Ray SeligmanParticipant
Very nice. What do you use to show the airspeed altitude and heading on the video? Is that special software or some type of hardware? It adds a lot to the video. Thanks.
-
December 24, 2017 at 10:33 #8073Ray SeligmanParticipant
Thank you so much for the answer. I think it’s also a very good day to watch football. Happy holidays
-
December 24, 2017 at 08:01 #8063Ray SeligmanParticipant
As always thank you for your information. I truly appreciate it. I had already seen that video but somebody told me that somebody told them that they thought someone else told them that to do the front fairing you had to actually remove the front wheel. It was hearsay about nine times removed. That is not correct is it? Again thanks for your quick response to these things. Perfect day to spend in the hanger getting this done unless I have to remove the front wheel. Have a really good holiday
Sent from my iPhone
-
-
AuthorPosts