[Frank Lunn]

This confirms my experience. There has to be 10-12 gallons remaining when my stick reads zero. The link you provided is very useful. Thanks for providing the information.

[Frank Lunn]

Thanks gent’s…sounds like I can remove them. It will make the repair much easier.
Cheers
Frank

[Frank Lunn]

Hi Todd,
Thanks for the info. I’ll be doing the same!
Frank

[Frank Lunn]

First, thanks for the reply. Second, by pull the wheel pants, do you mean to remove them? That is what
I finally had to do with the left main wheel.
Third, is there a tube solution. I could replace them at annual. They are probably quite old, considering the shape the plane was in when
I bought it.
Thanks very much
Frank

[Frank Lunn]

I have the vents. It is the lower panel parts on each side that I need. Do you have those? Thanks

[Frank Lunn]

Thanks much KP. I located most but not all of these from the info you previously provided. I certainly appreciate the time you took to help me.
THanks again
Frank

[Frank Lunn]

Thanks Kevin. Checked the fuse and it is ok. I’ll followup on your other suggestions.
Appreciate it.
Frank

[Frank Lunn]

Hi,
I need to replace the placard on my 1977 AA5 that is located on the plastic housing ( which I’m replacing) below the dome light. I can probably make my own but the lettering is worn out and I’m not sure what some of the metrics are. I’ve attached a photo. I can’t find the correct placard at the various shops. Perhaps someone could take a photo and send it to me.
Thanks
Frank

franklunn@gmail.com

 

 

 

 

Attachments:

You must be logged in to view attached files.

[Author]

Posts