Home › Forums › Technical Information › Not sure where to ask this
Tagged: Pushing spinner
- This topic has 6 replies, 5 voices, and was last updated 6 years, 6 months ago by John Cotter.
-
AuthorPosts
-
-
October 29, 2017 at 12:00 #7764Ray SeligmanParticipant
So for the last month I have owned a 1979 tiger and I couldn’t be happier. The only problem is getting it back into the hanger and it was a bear to push. So I set up a winch that Pulls backwards from the front. Not my design OK clearly stole it from someone else but it works great. The guy in the hanger next-door to me has a Cherokee 180 similar size plane and I’m guessing about the same weight. I puled his out by hand it’s like moving a baby carriage and we go to pull mine out by hand I can certainly do it but it takes a hell of a lot more Pull. It just had an annual, as far as I know nothing is hanging up. I think part of it may be because the towbar is so short I’m pulling upwards as much as I am forward but I was just wondering are these tigers notoriously difficult to Pull? I can certainly do it but it is a hell of a lot easier on the piper. Getting it back I understand is a job but the winch is working perfectly but I was just wondering why it seems so hard to roll forward when pulling it.
Attachments:
You must be logged in to view attached files. -
October 29, 2017 at 13:23 #7767Dan VoegeliParticipant
I have a 1978 Cheetah and push mine into the hanger by myself all the time. I steer it with one hand and push on the nose cone with the other. It is no problem for me and there is even a small incline at the hanger door. Have you jacked up your wheels to see how much drag is on them, might have the bearings a little tight or maybe your brake calipers are not moving freely on the pins causing the brakes to drag.
- This reply was modified 6 years, 6 months ago by Dan Voegeli.
-
October 29, 2017 at 13:36 #7769Ray SeligmanParticipant
Is jacking each wheel up independently something I can do or do I need a mechanic to do this?
-
October 29, 2017 at 18:48 #7770Dan VoegeliParticipant
If you are mechanically inclined and know what you are doing you can jack up the wheels and check them. It should fall under FAA “preventive maintainance” GPA has videos on You Tube on jacking the individual wheels.
-
October 31, 2017 at 08:24 #7779M.D. WillsParticipant
Might also want to check tire air pressure. A couple of pounds from the optimum really increases the drag and visually they looked properly inflated. I had mine under-inflated by 2 lbs on all tires (nose – 19 lbs. and mains 22 lbs. it was cold outside) and I could barely drag it. Just a simple check…
–Martin–
- This reply was modified 6 years, 6 months ago by M.D. Wills.
-
October 31, 2017 at 08:44 #7783RichardParticipant
A lot of Tiger owners including myself put closer to 35-36 lbs in the main to aid with rolling in and out of the hangar. This was suggested to me by a lot of various Tiger owners, and it seemed to work well.
-
October 31, 2017 at 10:54 #7785John CotterSpectator
[cotter] I’ll guess the Maintenance Manual is not normal reading for aircraft owners, so I’ll pass along this quote:
The Gulfstream Maintenance Manual Revision 4, June 1, 1983, Section 61-1-1, Page 1:
CAUTION: DO NOT MOVE THE AIRCRAFT ON THE GROUND BY PUSHING ON THE SPINNER.
-
-
AuthorPosts
- You must be logged in to reply to this topic.